Glass Industry News

Park Cam achieves zero refractory wear over 12 months at full capacity

, Park Cam

Park Cam recently operated a furnace at full capacity for twelve months with virtually zero wear in critical areas. Working closely with PaneraTech, they were able to make data-driven decisions to target cooling and maximize the operation time before overcoating.

The furnace that achieved this milestone, Furnace 20, began its campaign in September 2013 at Park Cam’s Bozuyuk Glass Packaging production facility. The company began a multi-year agreement with PaneraTech to monitor their furnace in 2018. SmartMelter® radar technology was used to inspect the furnace at least twice per year. After each inspection, the plant team discussed results and recommended actions with PaneraTech’s team. Because PaneraTech had created a digital model of their furnace, the teams could visually review the measurements of each refractory block.

PaneraTech was able to contribute insights from over half a million refractory measurements and make predictions based on that data. Using this data as a guide, Park Cam increased cooling wind at critical blocks and monitored those areas closely to ensure safe operation. They also collected temperature data on a regular basis on these critical blocks. After each six-month scan, adjustments were made.

“We were able to have confidence in our decisions because of the data PaneraTech provided,” explained Cetin EĞRİ Deputy General Manager of Park Cam. “Because of this, we could carefully manage risk and make good financial decisions at the same time.”
The industry typically overcoats when refractory thickness is 25 mm (1 inch). However, Park Cam was able to operate without overcoating an additional two years after reaching 25 mm. Once the thickness reached 18 mm, the targeted cooling allowed the plant to operate 12 months with virtually no additional wear on these blocks. After this 12-month period, they decided to overcoat the refractory.
“Our experience with Park Cam is a testament to what we have known for a long time; that a manufacturer can run their sidewalls much longer than what they currently do once thicknesses reach critical level,” said Yakup Bayram, president of PaneraTech. “We have seen the difference that data-driven decisions can make. This is why we have expanded our services to include a full Digital Furnace Monitoring program. Park Cam’s innovative approach has helped to lay the groundwork for this service.”
PaneraTech’s Digital Furnace Monitoring Program includes SmartAudit, regular furnace audits that incorporate an 18-point radar spot check into the standard visual, thermal, and endoscopic evaluations. New technology is also available as part of this program, such as Polaris continuous monitoring sensors. Digital Endoscopy that uses laser technology will be available in 2023. PaneraTech works with manufacturers to create a schedule of services for each year of the campaign life, and condition-based monitoring can be added on a narrow scope as necessary.

 

, © Park Cam

Les informations publiées sur notre portail sont soumises au droit d´auteur et appartiennent à la société en question resp. à la source des nouvelles. Tous les droits sont réservés expressément. N´importe quel utilisateur qui accède à un tel matériel peut faire ainsi seulement pour sa propre utilisation personnelle, et l´usage d´un tel matériel est au risque unique de l´utilisateur. La redistribution ou toute autre exploitation commerciale d´un tel matériel de nouvelles est expressément interdite. Là où un tel matériel de nouvelles est fourni par un tiers, chaque utilisateur accepte d´observer et être lié par les limites spécifiques de l´utilisation s´appliquant à un tel matériel de nouvelles. Glass Global ne représente ou n´approuve pas l´exactitude ou la fiabilité d´aucune des informations citées dans les nouvelles ou pages externes auxquelles on se réfère ici.

Should the content or the design of these sites violate third parties rights or legal prescriptions, we kindly ask you to send us a respective message without invoice or cost. We guarantee that passages where the claim is considered as justified will be removed immediately, without any necessity to involve any lawyer into this issue. We will reject any claim caused by submission of a honorary note in this regard without any prior contact and confirmation of the issueby us and we reserve the right ssue counter claim ourselves because of violation of aforesaid conditions.



Info Grid

Glass studies

Updated worldwide glass study 2024

plants.glassglobal.com

Updated hollow glass study 2024

Request more information

Updated float glass study 2024

Request more information

Further glass market studies

Request more information

Portrait de la société



Updated worldwide glass market study 2024 available now for flat, container glass and tableware

We have updated our international studies on flat glass, container glass and tableware for 2024.

This unique software provides a global overview about glass producers and technical details. Easy to use and clear tables summarize information and data about glass makers such as: Glass types: flat glass, container glass, tableware, production capacities in regions and countries, number of furnaces, furnace types, year of construction, glass types and sub-types, products, project information, special news and downloads.

Further databases supplying demoscopic data and import and export data complete the market survey. Based on these data, prepare individual country profiles with information about local production capacities, local market sizes and expected demand in the future.

Request your offer via plants.glassglobal.com.

Updated container glass study 2024

X

Updated float glass study 2024

X

Further glass studies and reports 2024

X