Glass Industry News

Heinz-Glas chooses a uniform process control system for batch house and melting ends

, Heinz-Glas

Heinz-Glas has adopted a uniform process control system for its batch house and melting ends, made by a trusted Siemens Solution Partner.

Its harmonized process control systems in the batch house and melting end helps make operation, maintenance, and updates more uniform, easier and efficient.

Based in Kleintettau in Bavaria, Heinz-Glas is an example of how tradition and innovation can live well together.

With a family tradition as glassmakers dating back to 1523, the company is now one of the largest manufacturers of small glass bottles and jars for the perfume and cosmetics industry.

Its core competencies include its in-house development department, its own mould manufacture, and proven high-tech production and finishing at its 16 locations worldwide.

So it’s no surprise that this renowned company in the perfume and cosmetics industry relies on glass containers from Heinz-Glas.

One of the pieces of the puzzle behind this success story is the company’s process control system.

Its production facility in Kleintettau is where the raw materials are mixed in accordance with precisely defined formulas and melted into liquid glass in three melting ends.

Since 2019, both the mixtures and the tanks have been controlled using the Simatic PCS 7 process control system. 

From standalone solution to integrated system
Andreas Lindhuber, Managing Partner of Schlemmer Prozess Systeme (SPS) in Deggendorf, Bavaria, says: “Even today, distributed control systems for batch houses are often developed separately from the system at the melting end.

"This is usually because the control systems are provided by the respective suppliers of the batch house and the melting end.”

Lindhuber is a specialist in measurement and control technology and his company has been a trusted Siemens Solution Partner since 2006.

SPS has managed the PCS 7 process control system at Heinz-Glas for about 20 years.

“But until recently we only looked after the system for the melting ends,” he adds.

“With the impending upgrade to the Simatic WinCC batch-house process visualisation system, it was a logical step for us to integrate the batch house into PCS 7.

“With this integrated approach, every time a new tank is constructed and every time a batch house is upgraded, our customers essentially have the opportunity to choose the system supplier that best suits their needs and have the process control system supported by a central contact.” 

Immediate benefits 
Production employees at Heinz-Glas noticed the benefits right after the conversion. Standardised operation means the batch house can now be operated from all the client systems distributed around the plant.

For many employees, that represents a saving of both distance and time in many operating sequences.

In addition, the standardised system makes it easier for SPS to perform upcoming maintenance and updates, which also reduces the costs for everyone else involved. 

From design to automation with no system discontinuities

SPS made full use of key potentials for improvement from the outset.

“Uniform engineering is an important element in design quality,” Lindhuber observes.

An approach that SPS selected for Heinz-Glas was the rigorous use of control module types (CMT) to create the automation programme.

“That allows us to share information with the Simatic PCS 7 Plant Automation Accelerator to ensure easy and rapid software engineering,” he adds.

“After all, engineering of process control systems has always been a challenge that involves many participants, many different data formats, and many interfaces.

System discontinuities often lead to transmission errors that need to be fixed manually – and that means more time and expense.

“The Siemens software gave us access to a fully integrated solution for system design and documentation.

As a result, Heinz-Glas benefited from consistent engineering with no system discontinuities between automation design and the distributed control system.”

Using the CMTs also offers more benefits for the future by laying the groundwork that will enable Heinz-Glas to switch over to the fully web-based Simatic PCS neo process control system in the years to come.

, © Heinz-Glas

Les informations publiées sur notre portail sont soumises au droit d´auteur et appartiennent à la société en question resp. à la source des nouvelles. Tous les droits sont réservés expressément. N´importe quel utilisateur qui accède à un tel matériel peut faire ainsi seulement pour sa propre utilisation personnelle, et l´usage d´un tel matériel est au risque unique de l´utilisateur. La redistribution ou toute autre exploitation commerciale d´un tel matériel de nouvelles est expressément interdite. Là où un tel matériel de nouvelles est fourni par un tiers, chaque utilisateur accepte d´observer et être lié par les limites spécifiques de l´utilisation s´appliquant à un tel matériel de nouvelles. Glass Global ne représente ou n´approuve pas l´exactitude ou la fiabilité d´aucune des informations citées dans les nouvelles ou pages externes auxquelles on se réfère ici.

Should the content or the design of these sites violate third parties rights or legal prescriptions, we kindly ask you to send us a respective message without invoice or cost. We guarantee that passages where the claim is considered as justified will be removed immediately, without any necessity to involve any lawyer into this issue. We will reject any claim caused by submission of a honorary note in this regard without any prior contact and confirmation of the issueby us and we reserve the right ssue counter claim ourselves because of violation of aforesaid conditions.



Info Grid

Glass studies

Updated worldwide glass study 2024

plants.glassglobal.com

Updated hollow glass study 2024

Request more information

Updated float glass study 2024

Request more information

Further glass market studies

Request more information

Portrait de la société



Updated worldwide glass market study 2024 available now for flat, container glass and tableware

We have updated our international studies on flat glass, container glass and tableware for 2024.

This unique software provides a global overview about glass producers and technical details. Easy to use and clear tables summarize information and data about glass makers such as: Glass types: flat glass, container glass, tableware, production capacities in regions and countries, number of furnaces, furnace types, year of construction, glass types and sub-types, products, project information, special news and downloads.

Further databases supplying demoscopic data and import and export data complete the market survey. Based on these data, prepare individual country profiles with information about local production capacities, local market sizes and expected demand in the future.

Request your offer via plants.glassglobal.com.

Updated container glass study 2024

X

Updated float glass study 2024

X

Further glass studies and reports 2024

X