Glass Industry News


, Revimac

Revimac realized the new XHS 700 High Performance Ware Transfer, capable of transferring articles from primary conveyor to cross conveyor up to a speed of 950 bottles per minute, depending on the container dimensions.

The new design is based on a double belt conveyor drive with a short auxiliary belt, that enables to keep the bottles in firm and steady contact with the fingers during their transfer.

The standard configuration comes with one drive for both belts and it is designed to have a 1:2 speed reduction ratio between the primary and secondary belt.  As an option, or,as per customer request, it can be installed with one drive for the primary and one drive for the secondary belt. In this case, there is the possibility to set and adjust a different and independent speed on both belts. In any configuration, standard or customized, the containers benefit a perfect stability during the transfer phase.

Moreover, the conveyor drive integrates a fixed cross-conveyor connection to guarantee a very steady article transfer, that is also supported by the perfect alignment between the belts, and the cross-conveyor is connected with a hinged terminal to compensate small height variations.

This new design is studied with a larger radius and a suitable chain guide along the transfer profile, where the fingers have no movable parts being directly supported by the belt in a position that is very close to the contact point of the container. The combination of all these features, added to the perfect alignment between primary conveyor and cross-conveyor belts, enable  the containers to reach the maximum transfer stability between the two conveyors.

The system is designed to eliminate completely the vibrations on the pockets, thanks to the large guides and the automatic chain tensioner. For easy alignment operations, the XHS 700 ware transfer is designed with an adjustable lower ware guide on the conveyor and cross-conveyor connection.

The adjustable transfer plate and the easy change system of the cross-conveyor roller, make operation and maintenance easier for the operators.

It is worth mentioning that the integration of the double belt conveyor drive is going to be available  for the other Revimac Ware Transfer models as well.

Finally, with the addition of the new XHS 700, Revimac have completed the full set of High Performance Ware Handling Equipment where ware transfer, stacker and cross conveyor are able to handle massive production of glass containers with the highest reliability, improving the hot-end efficiency w.r.t. pack-to-melt.

Specially conceived for double, triple and quad gob production, the Revimac High Performance Ware Handling Ensemble is the answer to a continuously growing and changing market, giving the flexibility to handle the widest range of glass containers.


, © Revimac

Les informations publiées sur notre portail sont soumises au droit d´auteur et appartiennent à la société en question resp. à la source des nouvelles. Tous les droits sont réservés expressément. N´importe quel utilisateur qui accède à un tel matériel peut faire ainsi seulement pour sa propre utilisation personnelle, et l´usage d´un tel matériel est au risque unique de l´utilisateur. La redistribution ou toute autre exploitation commerciale d´un tel matériel de nouvelles est expressément interdite. Là où un tel matériel de nouvelles est fourni par un tiers, chaque utilisateur accepte d´observer et être lié par les limites spécifiques de l´utilisation s´appliquant à un tel matériel de nouvelles. Glass Global ne représente ou n´approuve pas l´exactitude ou la fiabilité d´aucune des informations citées dans les nouvelles ou pages externes auxquelles on se réfère ici.

Should the content or the design of these sites violate third parties rights or legal prescriptions, we kindly ask you to send us a respective message without invoice or cost. We guarantee that passages where the claim is considered as justified will be removed immediately, without any necessity to involve any lawyer into this issue. We will reject any claim caused by submission of a honorary note in this regard without any prior contact and confirmation of the issueby us and we reserve the right ssue counter claim ourselves because of violation of aforesaid conditions.

Info Grid

Glass studies

Updated worldwide glass study 2021

Updated hollow glass study 2021

Request more information

Updated float glass study 2021

Request more information

Further glass market studies

Request more information

Portrait de la société

Updated worldwide glass market study 2021 available now for flat, container glass and tableware

We have updated our international studies on flat glass, container glass and tableware for 2021.

This unique software provides a global overview about glass producers and technical details. Easy to use and clear tables summarize information and data about glass makers such as: Glass types: flat glass, container glass, tableware, production capacities in regions and countries, number of furnaces, furnace types, year of construction, glass types and sub-types, products, project information, special news and downloads.

Further databases supplying demoscopic data and import and export data complete the market survey. Based on these data, prepare individual country profiles with information about local production capacities, local market sizes and expected demand in the future.

Request your offer via

Updated Hollow glass study 2021


Updated Float glass study 2021


Further glass studies and reports 2021