CUGHER GLASS: RESPONDING TO PRODUCTION NEEDS WITH HIGH-TECH INNOVATIONS

PRINTING VERSATILITY
Cugher Glass, a Company based in Novate Milanese, just outside Milan, northern Italy, has been operating for 50 years in the production of machines and complete solutions for silk screen printing processes with high technological content. Now the company consolidates its customer oriented aptitude by optimizing the production of the new Fast line characterized by very high printing versatility, which is specifically dedicated to the Home Appliance sector. Cugher’s production, which is conducted by the Flexible Engineering driver, is ready to satisfy the emerging needs of the market, adapting its solutions in response to these trends: the production of each single component – hardware and software – is industrialized so that it can be subsequently customized and configured on the base of the contract specifications, without an excessive effort of resources. The Fast series is extremely rapid and offers excellent performances with regard to cycle times and production changes. The Fast series can print on both large and very small surfaces.

PRODUCTION CHANGE-OVER
The format change is a basic task in the Home Appliance industry, where the requirements to change the type of glass to be printed is very common. The changeover can be carried out by a skilled operator in a few minutes, thanks to the self learning system of the glass formats. Moreover, all the operations related to the different batches can be easily performed by a single operator on the machine. The very easy maintenance operations have been further improved thanks to some recent interventions on the design of the machine itself. Machine downtimes are very low thanks to reliable and high quality components. All machines are designed to be equipped with related options.

The main features of the Fast series are:

Possibility to set different speeds for squeegee bar and scraper
Anti-drip system, on the printing bridge (squeegee bar/scraper group)
Constant pressure of squeegee bar and scraper, which can be set from the recipe on the operator panel.
Quick and easy frame registration, with micrometric precision on all directions, including rotation.
Adjustable height of printing head , depending on glass thickness and to make cleaning and maintenance operations easier.
Frame extraction without losing the registers and pneumatic locking of the same.
Possibility to raise the printing head up to 500mm to facilitate cleaning/maintenance operations (in total 1,500mm from the floor)
Anodized and ground aluminium printing table, provided with belts for moving the glass in order to be able to handle even holed glass
Cycle time: 6 seconds: with maximum glass size – 800 x 1,000mm – possible to print up to 600 glasses/ hour. The proof of the continuous relationship with customers and of the attentive and constructive listening to the production needs coming from the sector, is the innovation content implemented by Cugher on the Fast line, improving its production performances.

OVERVIEW
The front pins for the quick centring change on printing table switch from two to four and are automatically selectable from the recipe, based on the glass size. Through the selection of the recipe, the operator engages the internal or external pair according to the dimensions of the glass being processed. This allows an even more precise centring. The replacement of the pins, in case of wear, occurs in a few seconds. New side bars on the precentring conveyor:

The bars have been modified so that there are no screws in contact with the glass even when the nesting plates start to wear out. The replacement of the nesting plates is done simply and quickly through dedicated knobs on the top. Motorized Peel Off adjustable from the operator panel: this functionality has been automated and now the setting of the peel off is done directly from the recipe. New nesting plates system on the printing table: the new nesting plates were built and mounted on the printing table to optimize the centring of the glass. New belts: The belts for glass movement are stronger and quick to replace.

OPTIONAL EQUIPMENT
Cugher also offers the possibility to equip the Fast line with the following options:

Additional centring pins on the inlet conveyor: in the pre-centring phase they facilitate the perfect alignment of the glass before entering the printing table.• Antistatic bar on the printing bridge: it allows to eliminate all the electrostatic charges that accumulate on the frame during the passage of squeegee bar and scraper.
Sliding squeegee clamp: it is possible to slide the clamps on the printing bridge according to the dimensions of the squeegee bar.
New frame centring system: thanks to the integration of cameras in the printing table, the automatic centring of the frame achieves maximum precision and speed.
Motorized frame holder: to help the operator in inserting and extracting the frame
New system for scraper pressure adjustment: in addition to the pressure adjustment in the recipe, an additional manual adjustment is allowed, according to production needs
Ball glass lifting system for pre-centring of particularly delicate glass: it allows a perfect pre-centring, ensuring that the glass is not scratched.

20.03.2019, CUGHER GLASS

Les informations publiées sur notre portail sont soumises au droit d´auteur et appartiennent à la société en question resp. à la source des nouvelles. Tous les droits sont réservés expressément. N´importe quel utilisateur qui accède à un tel matériel peut faire ainsi seulement pour sa propre utilisation personnelle, et l´usage d´un tel matériel est au risque unique de l´utilisateur. La redistribution ou toute autre exploitation commerciale d´un tel matériel de nouvelles est expressément interdite. Là où un tel matériel de nouvelles est fourni par un tiers, chaque utilisateur accepte d´observer et être lié par les limites spécifiques de l´utilisation s´appliquant à un tel matériel de nouvelles. Glass Global ne représente ou n´approuve pas l´exactitude ou la fiabilité d´aucune des informations citées dans les nouvelles ou pages externes auxquelles on se réfère ici.

Should the content or the design of these sites violate third parties rights or legal prescriptions, we kindly ask you to send us a respective message without invoice or cost. We guarantee that passages where the claim is considered as justified will be removed immediately, without any necessity to involve any lawyer into this issue. We will reject any claim caused by submission of a honorary note in this regard without any prior contact and confirmation of the issueby us and we reserve the right ssue counter claim ourselves because of violation of aforesaid conditions.